Glossary · Regulation
Pendulum bob
The mass carried by a pendulum; its position contributes to effective length and period.
Explanation
A pendulum bob is the mass carried on the rod or other suspension assembly. Lens-shaped bobs are common, but shape alone does not identify a regulator or establish precision. The relevant length is the pendulum's effective dynamical length, not simply the distance from the case top to the bob's bottom. In a real assembly, the rod, suspension and distribution of mass also contribute to behaviour. A decorative swinging bob on an electronic clock need not regulate that clock at all.
In a conventional gravity pendulum with a supporting rating nut, raising the bob usually shortens effective length and increases the clock's rate; lowering it has the opposite effect. That is a direction of change, not a universal number of seconds per turn. A replacement that looks similar may differ in mass, mounting or adjustment range. Keep evidence for a replacement separate from an assumption of originality, and compare the complete pendulum with records for the actual movement.
Record the visible bob, rod and mounting before drawing a conclusion about a stopping clock. Contact with the case, a loose assembly or a damaged suspension can interrupt operation without the bob itself being defective. Icon's care guidance treats regulation as a separate task from repair and recommends supporting the pendulum against twisting during authorised adjustment. An exterior photograph cannot establish hidden clearance, correct suspension or the suitability of a replacement.
Sources & references
- https://en.wikipedia.org/wiki/Pendulum_clock
- https://www.icon.org.uk/conservation-hub/caring-for-your-collections/clocks.html
Where sources disagree, the disagreement is stated rather than resolved silently.
What to record
- Describe bob form, rod and mounting as one assembly.
- Keep replacement claims with their evidence.
- Record rate over a stated interval, not from one brief swing.
Do not swing a pendulum widely or use its rod as a handle; obtain advice for an unfamiliar or fragile assembly.
In the object catalogue
Catalogued objects whose own source record mentions “Pendulum bob”. The quoted line shows where; it is the seller’s or museum’s wording, not independent verification.

Clock
Sessions Grand Assortment #3 gingerbread clock
“Embossed pendulum bob visible through the decorated glass pane”

Clock
American Seth Thomas No. 2 Regulator Clock
“This American Seth Thomas No. 2 wall regulator is housed in a quarter-sawn oak case measuring 35 inches high by 16 inches wide and 5 inches deep. Powered by a single-weight move…”

Clock
Black Forest Cuckoo Clock, circa 1900
“Carved pendulum bob and two suspended cast-iron pine-cone weights on chains below”

Pocket watch
Continental silver verge fusee mock pendulum pocket watch
“This Continental open-face pocket watch dates to circa 1810, featuring a gilt full-plate verge fusee movement. According to the seller, the balance and escape wheel are inverted…”

Clock
Bulle Electric Clock Under Glass Dome
“Cylindrical coil assembly suspended as the pendulum bob over the curved magnet.”

Clock
Biedermeier Vienna Regulator Wall Clock
“Dating to the nineteenth century and styled in the Biedermeier tradition, this wall-mounted regulator clock features a mahogany veneered case decorated with carved mouldings, de…”