Skip to content
The Encyclopedia of Horology

Glossary · Mechanism

Suspension spring

A flexible suspension element supporting a pendulum; gravity-swing and torsion-clock springs perform different roles.

Explanation

Many gravity pendulums hang from a short metal ribbon or leaf suspension that flexes as they swing. The suspension carries the assembly while permitting motion; the crutch or equivalent linkage supplies impulse separately. Not all pendulums use this construction: knife-edge suspensions occur in precision clocks, and mounting blocks and leaders vary. The presence of a metal strip does not establish an interchangeable replacement specification.

In a torsion or anniversary clock, the suspended mass rotates and the suspension spring's elasticity supplies the restoring torque. In an ordinary gravity-swing clock, gravity is the principal restoring influence. These uses should not be collapsed into a single generic spring drawing. Identify the clock type, attachment and documented spring specification before interpreting material, length or thickness. A photograph may show a kink or fracture, but cannot certify stiffness or the correct replacement.

Transport shock and twisting can damage a fragile suspension, particularly when hanging parts are unsecured. A clock that has stopped after moving needs examination of the complete arrangement rather than an assumption that the spring is the only fault. Record any changed spring and who fitted it. Operation, originality and safe handling are separate assessments; preserving a clock without running it remains a valid conservation decision.

Sources & references

  1. https://en.wikipedia.org/wiki/Pendulum_clock
  2. https://www.icon.org.uk/conservation-hub/caring-for-your-collections/clocks.html

Where sources disagree, the disagreement is stated rather than resolved silently.

Distinctions at a glance

ConstructionRestoring actionSuspension context
Gravity-swing pendulumPrincipally gravityLeaf or ribbon may flex
Torsion pendulumTwisting spring elasticityNot the same spring specification
Knife-edge suspensionGravityNot a ribbon-spring mounting

What to record

  • State gravity-swing or torsion-pendulum construction.
  • Record spring mounting and leader where visible.
  • Retain the documented replacement specification and treatment history.

Do not twist a suspended pendulum, straighten a kink or fit a guessed spring specification.

In the object catalogue

Catalogued objects whose own source record mentions “Suspension spring”. The quoted line shows where; it is the seller’s or museum’s wording, not independent verification.