Skip to content
The Encyclopedia of Horology

Glossary · Regulation

Middle temperature error

Residual rate error of a compensation balance at middle temperatures.

Explanation

Middle temperature error is the residual rate error left when a bimetallic compensation balance and steel hairspring have been adjusted at two chosen temperatures but do not follow a perfectly matching curve between them. A chronometer can therefore be close at hot and cold test points yet gain or lose around ordinary middle temperatures. The problem belongs to a particular compensation system, not to every temperature-related rate fault.

Chronometer makers used auxiliary compensation, careful rating and certificates to manage the error. Later alloys such as Elinvar and Nivarox-type hairsprings reduced the need for cut bimetallic balances in ordinary watches, but old instruments should still be described from their actual construction and rating records. A modern timing reading cannot reconstruct historical observatory performance without documentary evidence.

Sources & references

  1. Gould, R. T., The Marine Chronometer — compensation and rating
  2. Rawlings, A. L., The Science of Clocks and Watches — temperature compensation

Where sources disagree, the disagreement is stated rather than resolved silently.

What to record

  • Identify balance type and hairspring material where documented.
  • Keep test temperatures and rating dates with any certificate.
  • Distinguish residual middle error from magnetism, poise and lubrication faults.

Do not move compensation screws or timing weights to experiment with temperature error.