Reinhold Schnekenburger GmbH Bracket Clock with Repeater

Case and Dial Construction

The clock is housed in a tall, rectangular timber frame that rests on a stepped base. The front of the case is fitted with a single glazed door that protects the dial assembly.

The dial consists of a silvered chapter ring featuring prominent Roman numerals. Set into the upper portion of the dial are two smaller subsidiary indicators; these facilitate the control of the striking mechanism and the regulation of the pendulum's speed. The entire assembly is visible behind the glazed door of the main casing.

Movement and Functionality

The clock is driven by a pendulum-based movement, which the auction description indicates was found to be in functional condition during a limited test. The mechanical system includes a striking train capable of executing a quarter-hour chime sequence, transmitted through four dedicated gongs.

To assist in reading the time in low light or at intervals, the clock includes a repeater mechanism, which is activated by a pull lever located on the side of the case. The movement itself carries a specific manufacturer identification mark, consisting of the letters 'RSM' positioned beneath a stylized flower image, confirming its origin with the Reinhold Schnekenburger workshop.

While the clock and striking mechanism functioned during testing, the auctioneers note that the timekeeping accuracy has not been verified.

Condition Report

The auction description provides a general overview of the clock's physical state, noting that the piece displays various signs of age and wear.

Specifically, the wooden case is noted to have small defects, though these do not appear to impact the primary function of the mechanism as tested.