Glossary · Mechanism
Safety action
The guard pin and roller arrangement that prevents unlocking out of turn.
Explanation
The lever escapement is detached: for most of the balance's swing the fork does not touch it. While detached, the fork must stay against its banking. The safety action ensures this. If a shock moves the fork, its guard pin (or dart) meets the edge of the safety roller and the fork returns to the banking instead of unlocking the escape wheel.
A crescent cut in the roller lets the guard pin pass at the moment the impulse pin enters the fork slot, so normal unlocking can take place. Single-roller escapements combine impulse and safety on one roller; double-roller escapements use a smaller separate safety roller, which allows a closer and more secure safety action.
What to record
- Check that the guard pin clears the roller with a small, even shake on both sides.
- Look at the roller to tell a single-roller from a double-roller escapement.
Adjusting the guard pin changes escapement safety; it should be done only by someone able to test the escapement afterwards.