Skip to content
The Encyclopedia of Horology

Glossary · Mechanism

Rubbed-in jewel

A jewel secured by burnishing metal over it.

Explanation

A rubbed-in jewel is held directly in the surrounding plate or bridge metal by burnishing or closing the metal over the jewel's edge. It differs from a jewel held in a separate chaton. The setting can be neat and reliable, but it is a construction detail: it does not by itself date a movement, prove low grade or prove originality.

Replacement leaves evidence only when inspected carefully: disturbed metal, different jewel colour or height, altered endshake, or mismatched finishing around the sink. These observations require magnification and often measurement. A photograph of a red stone cannot show whether the pivot, hole size or endshake is correct.

Sources & references

  1. de Carle, D., Practical Watch Repairing — jewel fitting
  2. Daniels, G., Watchmaking — bearings and endshake

Where sources disagree, the disagreement is stated rather than resolved silently.

What to record

  • Record whether the jewel is in a chaton or directly in the plate.
  • Note visible disturbed metal only when it is actually visible.
  • Compare setting style across the same calibre before inferring repair.

Opening or closing rubbed-in settings needs jewelling tools and measurement; do not improvise with a punch.