Glossary · Mechanism
Leading-off rod
The shaft carrying motion from a turret movement to an external dial.
Explanation
A turret clock movement usually sits some distance from its dials. Leading-off rods carry the drive from the movement to the motion work behind each dial, with bevel gears where the direction changes and often universal joints to allow for small misalignment.
The rods must turn freely; friction, misalignment or ice on the hands loads the movement and can stop it. Many turret clocks have a separate setting dial on the movement so the external hands can be set without climbing to each dial.
What to record
- Check that each rod turns freely by hand with the movement disconnected.
- Look for wear at the bevel gears behind each dial.
Turret clocks store large forces in their weights; work on them should follow safe procedures.