Case Construction and Military Markings
The timepiece features a stainless steel case reported by the vendor to measure 38.2 mm in width, with a lug height of 45.75 mm and a lug width of 20 mm. Direct observation confirms fixed lug bars positioned between the case lugs, as well as a single cylindrical chronograph pusher situated at approximately 2 o'clock adjacent to a fluted winding crown.
The screw-down case back has a brushed finish showing surface scratches consistent with use. It is visibly engraved with 'H.S. ^ 9' above the serial number '4403'. The seller claims this HS9 engraving represents a British Ministry of Defence designation for RAF-issued wristwatches, and lists the crystal as plexiglass.
Evidence for this section
- “Stainless steel screw case back engraved 'H.S. ^ 9' above '4403'”
- “Fixed lug bars positioned between the case lugs”
- “Single cylindrical chronograph pusher situated at approximately 2 o'clock alongside the fluted winding crown”
- “Lug Height 45.75mm Width 38.2mm Lug width 20mm”
- “corresponding HS9 engraving on the case back — the British Ministry of Defence designation for RAF-issued wristwatches”
