Skip to content
The Encyclopedia of Horology

Glossary · Case & Dial

Bezel thread

The screw thread securing a screwed bezel.

Explanation

Some watch cases have bezels that screw onto the case middle rather than snapping on. Screwed bezels were used on certain pocket-watch cases and on some early water-resistant wristwatches. The threads are fine and can be damaged by forcing or by trying to prise the bezel off as if it were a snap fitting.

Identifying the bezel type before opening a case prevents damage. A screwed bezel shows no opening notch, and cross-threading or worn threads can make it loose or difficult to remove.

What to record

  • Look for an opening notch; its absence may indicate a screwed bezel.
  • Check for a fine thread line where bezel meets case.

Never use a case knife on a screwed bezel; it can damage threads and crystal.