Skip to content
The Encyclopedia of Horology

Glossary · Regulation

Breathing

The concentric expansion and contraction of a hairspring.

Explanation

As the balance swings, its spring alternately winds and unwinds; the coils open and close in a movement called breathing. Ideally the spring breathes concentrically, its centre of gravity staying on the balance axis. A flat spiral cannot do this perfectly, because its outer end is fixed at the stud and the coils shift sideways as they open.

Off-centre breathing pushes sideways on the balance pivots and changes the rate in different positions and amplitudes. Terminal curves such as the Breguet overcoil and curves calculated by Phillips were developed to make breathing more concentric. Regulator pins that are too wide apart, or a spring that touches them unevenly, also spoil breathing.

What to record

  • Watch the coils from above as the balance swings: they should expand evenly around the staff.
  • Coils touching each other or the balance arms are a fault, often from magnetism or a shock.

Never touch a hairspring with steel tweezers while the watch is running; reforming springs is specialist work.

In the object catalogue

Catalogued objects whose own source record mentions “Breathing”. The quoted line shows where; it is the seller’s or museum’s wording, not independent verification.