Skip to content
The Encyclopedia of Horology

Glossary · Mechanism

Draw

The escapement geometry that pulls the pallet fork against its banking so the train stays locked between impulses.

Explanation

Draw is the safety action of the lever escapement. The locking faces of the pallet stones are angled so that the escape wheel's pressure pulls the fork toward its banking pin rather than pushing it away. If the watch is jolted, draw holds the fork in place until the balance's guard pin and roller action move it deliberately. Without draw, a knock could unlock the escapement and let the train run forward.

Draw is set by the angles and depths of the pallet stones, established when the escapement is adjusted with the train removed. Too little draw risks accidental unlocking; too much wastes impulse energy and can make the fork sluggish. These are measured quantities for a watchmaker, not owner adjustments, and they cannot be judged from the sound of a running watch.

Record any mention of draw, lock, drop or lift from service documentation with the watchmaker's name and date. A listing that claims 'escapement recently adjusted' without documentation is a statement about history, not evidence of current adjustment.

Sources & references

  1. de Carle, D., Practical Watch Repairing — technical further reading; exact procedures require calibre documentation
  2. Reymondin et al., The Theory of Horology — construction and terminology further reading

Where sources disagree, the disagreement is stated rather than resolved silently.

Distinctions at a glance

TermMeaningSet by
DrawFork pulled to banking by wheel pressurePallet-stone angles
LockDepth of tooth on the locking faceEscapement adjustment
DropFree motion as a tooth leaves a palletWheel and pallet geometry
LiftAngle of impulse actionEscapement design

What to record

  • Keep draw, lock, drop and lift as distinct terms.
  • Cite service documentation for any adjustment claim.
  • Treat unlocking after shock as a condition record, not a self-repair task.

Never attempt to alter pallet-stone depth or banking; escapement safety action is set by measurement with the movement dismantled.