Skip to content
The Encyclopedia of Horology

Glossary · Mechanism

Check spring

A spring that holds a lever or pawl in its working position; in the lever escapement, the spring acting on the pallets.

Explanation

A check spring is any small spring that keeps a lever, pawl or click pressed into its working position. The click spring of the winding work is one example; striking work and repeaters use many more. In older English usage, the lever escapement's draw was sometimes discussed alongside the spring action of the fork, and the term appears in period repair books in several senses, so the context of the word matters.

These springs are small, often blued or polished, and easily distorted. A weakened or broken check spring shows as a click that slips, a lever that fails to return, or a repeater that mis-sequences. Because the same symptom can come from wear at the working face rather than the spring, record the symptom and leave the diagnosis to examination.

When reading a service note or catalogue, identify which check spring is meant: winding click, striking detent, repeater all-or-nothing piece or another lever. A photograph of the movement rarely shows the spring's working tension, so appearance alone cannot certify function.

Sources & references

  1. de Carle, D., Practical Watch Repairing — technical further reading; exact procedures require calibre documentation
  2. Reymondin et al., The Theory of Horology — construction and terminology further reading

Where sources disagree, the disagreement is stated rather than resolved silently.

Distinctions at a glance

SpringActs onFailure sign
Click springWinding clickSlipping or silent winding
Detent springStriking or repeater leverMis-sequenced strike
Return springSetting or selector leverLever fails to return
Period 'check spring' usageVaries by repair bookIdentify from context

What to record

  • Identify which lever or pawl the spring serves.
  • Record the symptom separately from the suspected spring.
  • Keep period usage of the term with its source.

Do not bend a check spring to increase its pressure; spring tension is set with the movement dismantled and the action measured.