Construction and Controls
The instrument is housed in a 56mm diameter plastic casing, fitted with an acrylic crystal. The design incorporates a rotating, grooved bezel intended for timing intervals. Unlike earlier three-button iterations, this model utilizes a two-button control system for its mechanical operations.
The primary crown at the 12 o'clock position governs winding and the start/stop functions of the timer. A separate pusher located on the right side of the housing acts as the reset mechanism, which resets the chronograph hands and the integrated hour display located at the 6 o'clock position.
Evidence for this section
- “بدنه این تایمر دارای قطر ۵۶ میلیمتر بوده”
- “از قاب پلاستیکی و سیستم کنترلی با دو دکمه بهره میبرد”
- “کوک ساعت و شروع/توقف عملکرد تایمر توسط سرکوک تعبیهشده در موقعیت ساعت ۱۲ انجام میشود”
