Glossary · Mechanism
Total lock
Lock depth plus run to banking.
Explanation
Total lock is measured with the lever resting against its banking. It is the depth at which the escape tooth then sits on the locking face of the pallet, made up of the lock at the moment of drop plus the run that followed. The balance has to unlock all of it, through the impulse pin acting on the fork, before impulse can begin.
Watchmakers treat total lock as a compromise. Shallow locking risks tripping, where a shock lets a tooth slip off the stone; deep locking makes unlocking harder, lowers amplitude and can make the rate more sensitive to changes in mainspring force. Both pallets should show similar total lock, and it is corrected by moving the pallet stones.
What to record
- Compare entry and exit pallets; a marked difference is a sign of incorrectly set stones.
- Low amplitude with clean, well-oiled parts can point to excessive lock.
Do not try to correct locking by bending banking pins on a valuable watch; the fault usually lies in the pallets.