Glossary · Regulation
Timing screws
Balance screws used to adjust the mean rate.
Explanation
Timing (mean-time) screws are the threaded screws in the rim of a screwed balance, turned in or out to adjust rate without disturbing the hairspring. Moving screws outward slows the watch, inward speeds it. Quarter screws near the arms have the largest effect. Their positions are part of the watch's adjustment and should be recorded before any cleaning.
In the object catalogue
Catalogued objects whose own source record mentions “Timing screws”. The quoted line shows where; it is the seller’s or museum’s wording, not independent verification.

Movement
Illinois Watch Co. Grade 187 pocket watch movement no. 1569915
“This pocket watch movement was produced by the Illinois Watch Company under Grade 187, Model 4, bearing serial number 1569915 and dated to circa 1901. It is configured in the 16…”

Movement
Manistee Watch Company movement serial number 31702
“This uncased pocket watch movement was produced by the Manistee Watch Company of Manistee, Michigan, and is engraved with serial number 31702. The movement is marked with 17 jew…”

Movement
Manistee Watch Company 16-size movement, serial 0028148
“Balance wheel with timing screws and hairspring visible under the balance cock.”

Pocket watch
Illinois Watch Co. Time King pocket watch, size 12s, grade 405
“Bimetallic balance wheel with timing screws, blued overcoil hairspring, and micrometric regulator.”

Movement
W & I Baird English Duplex Fusee Pocket Watch Movement
“This English full-plate fusee movement, catalogued to circa 1835, features a duplex escapement with a brass escape wheel and an oversized compensated balance wheel with timing s…”

Component
Elgin No. 239 Veritas Hairspring and Balance Assembly
“This horological component comprises the hairspring and balance assembly identified by the source as originating from an Elgin No. 239 Veritas pocket watch movement. The source …”