Skip to content
The Encyclopedia of Horology

Glossary · Mechanism

Balance spring collet

The small ring that secures the hairspring to the balance staff.

Explanation

The collet is a small split ring fitted friction-tight on the balance staff. The inner end of the hairspring is pinned or glued into it, so that the spring turns with the balance. Turning the collet slightly on the staff is the traditional way to put a watch in beat when the stud is fixed.

Collets must grip firmly but be removable without damage. They are usually brass, which is soft enough to spread and close slightly. A collet that is loose lets the spring slip and the watch go out of beat; one forced on too hard can split or distort the inner coil.

What to record

  • Check the beat: an uneven tick may mean the collet has slipped on the staff.
  • Inspect the inner coil where it leaves the collet for kinks.

Collets are removed with a collet remover or by careful levering at the split; never pull on the hairspring.