Skip to content
The Encyclopedia of Horology

Movement record · Switzerland

Sellita SW200-1

Partially verified

Automatic calibre dimensionally comparable to widely used ETA architecture

Technical specifications

Diameter
25.6 mm
Height
4.6 mm
Jewels
26
Frequency
28,800 vph (4 Hz)
Power reserve
Approx. 38 hours
Winding
Automatic with manual winding
Setting
Pendant set with quick-set date
Escapement
Swiss lever
Balance
Monometallic balance with alloy hairspring
Complications
Date, Centre seconds

Identification features

  • Sellita marking; dimensions allow interchange with common case and dial tooling

Known variants

  • Elaborated and chronometer grades

Servicing notes

Cleaning, lubrication, mainspring and pivot work belong with a qualified watchmaker working from calibre-specific documentation. Conserve original parts: replacing a worn component with a modern substitute changes the object, and refinishing plates or dials destroys evidence.

General guidance only. Antique movements should be serviced by a qualified watchmaker.

Historical significance

Illustrates how the Swiss supply trade re-formed in the twenty-first century once movement supply from a single dominant source tightened.

Diagram

top plate or bridgespillar platebalance and cockwheel train between the plates
Schematic: plate and bridge layout. An outline schematic drawn to show the arrangement of the parts discussed here. It is not a dimensioned working drawing and does not depict a particular maker's calibre.

Sources & references

  1. de Carle, D., Watch and Clock Encyclopedia
  2. Period trade material catalogues and calibre reference compilations (edition-dependent)
  3. Published manufacturer technical documentation where available

Where sources disagree, the disagreement is stated rather than resolved silently.